Web Charts DRM-Log Plotter Interactive graphs using Google Charts
WEB Log - PLOTTER
RTI Tamsui Test
Freq.:
11665 kHz
Site:
Tamsui
Date:
2016-10-10
All values at log start
Mode:
A / 10 kHz
Bitrate:
13.98 kbps
MSC:
16 QAM
Prot. Lev.:
0 / 0
Decoded Audio:
99.20 %
FAC CRC:
99.89 %
SNR values:
Max.:
19.06 dB
Min.:
10.07 dB
Average:
14.43 dB
Doppler values:
Max.:
0.65 Hz
Min.:
0.32 Hz
Average:
0.44 Hz
Delay values:
Max.:
5.38 ms
Min.:
2.17 ms
Average:
3.78 ms
0 errors in Sync (0.0 %)
4 errors in Fast Access Channel (0.11 %)
207 errors in Main Service Channel (5.79 %)
Max. SNR at 10:56 UTC
Min. SNR at 10:01 UTC
Max. Doppler at 10:48 UTC
Min. Doppler at 10:13 UTC
Max. Delay at 10:08 UTC
Min. Delay at 10:00 UTC
Location: Stockholm
Latitude:
59°25'N
Longitude:
18°01'E
Distance to TX Site:
8344 km
AZ to / from TX Site:
66 / 329 deg.
Receiver information:
(Refer to the box below)
Mode (the first detected):
A3000 from 09:58
Runtime:
1 h 00 min
Software:
Dream 1.6.1cvs
Yaesu FRG 7700, 70 cm active antenna and Dual Core Pentium 2.7 GHz
Once again the same configuration as n 22nd July 2016, 13.98 kbps, EEP, aac (without SBR) Mono, Mode A, 10 kHz, 4/16 QAM, Protection 0/0. The SDC CRC was always lighting yellow in DReaM Ver. 1.6.1 cvs. The frequency was clear and the reception was perfect except for the terrible over-driven audio. The way too high input level caused severe distortion of the decoded audio and sometimes it was very hard to understand what the announcer said.
Created with Web Charts DRM-Log Plotter Full version 4.1.9
